Section 4 (Clutch System): Flywheel: Installation

WARNING: This page is about a different variant/trim than selected.

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel Using Crankshaft Stopper
Tighten the flywheel attaching bolts to the specified torque.
NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque: 72 N.m (7.3 kgf-m, 52.8 ft-lb)

Fig 2: Identifying Tightening Sequence Of Flywheel Bolts
Install the clutch disc and cover. <Ref. to INSTALLATION Clutch Disc And Cover. >
Install the transmission assembly. <Ref. to INSTALLATION Manual Transmission Assembly . >