Front ABS Wheel Speed Sensor: Removal

1. Disconnect the ground cable from battery.
2. Disconnect the ABS wheel speed sensor connector located next to the front strut mounting house in the engine compartment.
3. Remove the bolts which secure the sensor harness to the strut.
   Fig 1: Locating Bolts Which Secure Sensor Harness To Strut

   Courtesy of SUBARU OF AMERICA, INC.
4. Remove the bolts which the secure sensor harness to the body.
   Fig 2: Identifying Bolts Which Secure Sensor Harness To Body

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the bolts which secure front ABS wheel speed sensor to the housing, and remove the front ABS wheel speed sensor.

CAUTION:

• Be careful not to damage the pole piece and the face of the teeth located at tip of the sensor during removal.
• Do not pull on the sensor harness during removal.

Fig 3: Identifying Bolts Which Secure Front ABS Wheel Speed Sensor To Housing

Courtesy of SUBARU OF AMERICA, INC.