MPT Model

Set the select lever to "P" range.
Using a plastic hammer, install the reduction driven gear assembly and the new washer, and tighten the new lock nut.
Tightening torque:

100 N.m (10.2 kgf-m, 73.8 ft-lb)

Fig 1: Tightening Lock Nut Using ST
Courtesy of SUBARU OF AMERICA, INC.
After tightening, stake the lock nut securely.
Join the transmission case and the extension case, and then install the rear vehicle speed sensor. <Ref. to INSTALLATION EXTENSION CASE. >
Install the transmission assembly to the vehicle. <Ref. to INSTALLATION AUTOMATIC TRANSMISSION ASSEMBLY. >