How To Use General Scan Tool

Prepare a general scan tool required by SAE J1978.
Open the cover and connect the general scan tool to the data link connector located in the lower portion of instrument panel (on the driver's side).

Fig 1: Locating Data Link Connector
Using the general scan tool, call up DTC and freeze frame data.
General scan tool functions consist of:
1. MODE $01: Current powertrain diagnostic data
2. MODE $02: Powertrain freeze frame data
3. MODE $03: Emission-related powertrain DTC
4. MODE $04: Clear/Reset emission-related diagnostic information
5. MODE $06: Request on-board monitoring test results for non-continuously monitoring system
6. MODE $07: Request on-board monitoring test results for continuously monitoring system
7. MODE $09: Request vehicle information
Read out the data according to repair procedures. (For detailed operation procedures, refer to "General Scan Tool Operation Manual".

NOTE: For details concerning DTC, refer to "LIST OF DIAGNOSTIC TROUBLE CODE (DTC) ". <Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >