LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Forester X L.L. Bean Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Compulsory Valve Operation Check Mode >> Operation

Compulsory Valve Operation Check Mode: Operation

  1. Prepare the Subaru Select Monitor kit. <Ref. to PREPARATION TOOL  GENERAL DESCRIPTION. >
    Fig 1: Identifying Subaru Select Monitor Kit
    G04998013
  2. Connect the diagnosis cable to Subaru Select Monitor.
  3. Insert the cartridge to Subaru Select Monitor. <Ref. to PREPARATION TOOL  GENERAL DESCRIPTION. >
    Fig 2: Inserting Cartridge Into Subaru Select Monitor
    G04998014
  4. Connect the test mode connector (A) at the lower portion of instrument panel (on the driver's side).
    Fig 3: Identifying Test Mode Connector
    G04993022
  5. Connect the Subaru Select Monitor to data link connector.
    1. Data link connector is located in the lower portion of instrument panel (on the driver's side).
      Fig 4: Locating Data Link Connector
      G04997584
    2. Connect the diagnosis cable to data link connector.
    CAUTION: Do not connect scan tools except for Subaru Select Monitor and general scan tool.
  6. Turn the ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
    Fig 5: Identifying Power Switch
    G04993032
  7. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  8. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  9. Press the [YES] key after the information of engine type has been displayed.
  10. On the «Engine Diagnosis» display screen, select the {System Operation Check Mode} and press the [YES] key.
  11. On the «System Operation Check Mode» display screen, select the {Actuator ON/OFF Operation} and press the [YES] key.
  12. Select the desired compulsory actuator on the «Actuator ON/OFF Operation» display screen and press the [YES] key.
  13. Pressing the [NO] key completes the compulsory valve operation check mode. The display will then return to the «Actuator ON/OFF Operation» screen.
CONTENT DISPLAY CHART

Contents Display
Compulsory fuel pump relay operation check Fuel Pump Relay
Compulsory radiator fan relay operation check Radiator Fan Relay
Compulsory air conditioning relay operation check A/C Compressor Relay
Compulsory purge control solenoid valve operation check CPC Valve Duty Ratio
Compulsory pressure control solenoid valve operation check PCV Solenoid Valve
Compulsory air assist vent control solenoid valve operation check Vent Control Solenoid Valve
NOTE: The following parts will be displayed but not functional.
DISPLAY CHART

Display
EGR Solenoid Valve
ASV Solenoid Valve
FICD Solenoid
Pressure Switching Sol. 1
Pressure Switching Sol.2
Turbocharger Wastegate Solenoid
AAI Solenoid Valve
Emission-bypass Valve
Fuel Tank Sensor Control Valve
Secondary Air Combination Valve 1
Secondary Air Combination Valve 2
Secondary Air Pump Relay
scientia non olet · About LEMON Manuals