LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Turbo, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from the camshaft position sensor RH.
  3. Remove the camshaft position sensor RH from the backside of cylinder head.
    Fig 2: Locating Camshaft Position Sensor LH
    G04999382Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the camshaft position sensor LH same as RH side.
scientia non olet · About LEMON Manuals