LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Drive Cycle >> Operation >> Drive Cycle F

Drive Cycle F

  1. Make sure that the engine coolant temperature at engine starting is less than 30°C (86°F)
  2. Warm up the engine until the engine coolant temperature rises for more than 95°C (203°F) from the level at engine start.
  3. Idle the engine for more than 10 minutes in the condition of step  2.
NOTE: Do not disconnect the terminal of battery during diagnosis. (If disconnecting the terminal of battery, the data will be cleared.)
DIAGNOSTIC TROUBLE CODES REFERENCE CHART

DTC Item Condition
P1448 Fuel Tank Sensor Control Valve Range/Performance -
scientia non olet · About LEMON Manuals