LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Drive Cycle >> Operation >> Drive Cycle E

Drive Cycle E

  1. Make sure that the battery voltage is more than 10.9V.
  2. Perform the CLEAR MEMORY MODE< Ref. to CLEAR MEMORY MODE . >
  3. Drive the vehicle for the distance equal to fuel of 30 (7.9 US gal, 6.6 lmp gal).
NOTE:
  • It is possible to drive intermittently.
  • Do not disconnect the terminal of battery during diagnosis. (If disconnecting the terminal of battery, the data will be cleared.)
DIAGNOSTIC TROUBLE CODES REFERENCE CHART

DTC Item Condition
P0461 Fuel Level Sensor Circuit Range/Performance -