Fuel Pump: Removal

WARNING:

NOTE: Fuel pump assembly consists of fuel pump and fuel level sensor.

Release fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , OPERATION, FUEL. >
Drain fuel from fuel tank.
< Ref. to DRAINING FUEL , OPERATION, FUEL. >
Raise rear seat and turn floor mat up.
Remove access hole lid.

Fig 1: Identifying Access Hole Lid
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from fuel pump.

Fig 2: Disconnecting Connector From Fuel Pump
Courtesy of SUBARU OF AMERICA, INC.
Disconnect quick connector and then disconnect fuel delivery hose (A) and return hose (B). < Ref. to REMOVAL , Fuel Delivery, RETURN AND EVAPORATION LINES. >

Fig 3: Disconnecting Fuel Delivery Hose And Return Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove nuts which install fuel pump assembly onto fuel tank.

Fig 4: Identifying Fuel Pump Assembly Nuts
Courtesy of SUBARU OF AMERICA, INC.
Take off fuel pump assembly from fuel tank.