LH Side

Release fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , OPERATION, FUEL. >
Open fuel flap lid, and remove fuel filler cap.
Disconnect battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove two bolts which install washer tank on body.

Fig 2: Locating Washer Tank Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from front window washer motor.
Disconnect connector from rear gate glass washer motor.

Fig 3: Disconnecting Connector From Rear Gate Glass Washer Motor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect rear window glass washer hose from washer motor, then plug connection with a suitable cap.
Move washer tank, and secure it away from working area.

Fig 4: Identifying Washer Tank
Courtesy of SUBARU OF AMERICA, INC.
Remove spark plug cords from spark plugs (#2 and #4 cylinders).

Fig 5: Identifying Spark Plug Cords
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel pipe protector LH.

Fig 6: Locating Fuel Pipe Protector LH Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from fuel injector.

Fig 7: Disconnecting Connector From Fuel Injector
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which holds injector pipe to intake manifold.

Fig 8: Locating Injector Pipe Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which holds fuel pipe on the left side intake manifold.

Fig 9: Locating Fuel Pipe Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel injector from intake manifold.
1. Remove fuel injector securing clip.
  
  Fig 10: Identifying Fuel Injector Securing Clip
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove fuel injector while lifting up fuel injector pipe.
  
  Fig 11: Lifting Up Fuel Injector Pipe
  Courtesy of SUBARU OF AMERICA, INC.