LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - Abs >> Rear ABS Sensor >> Inspection >> Abs Sensor

Abs Sensor

  1. Check pole piece of ABS sensor for foreign particles or damage. If necessary, clean pole piece or replace ABS sensor.
  2. Measure ABS sensor resistance.
    Fig 1: Measuring Resistance Between ABS Sensor Terminals
    G05003751Courtesy of SUBARU OF AMERICA, INC.
    RESISTANCE SPECIFICATION

    Terminal No. Standard
    1 and 2 1.25±0.25 kΩ
    CAUTION: If resistance is outside the standard value, replace ABS sensor with new one.
    NOTE: Check ABS sensor cable for discontinuity. If necessary, replace with a new one.
scientia non olet · About LEMON Manuals