LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Installation

Impact Sensor: Installation

  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Press the UNLOCK button of transmitter.
  4. Disconnect the ground cable from the battery.
  5. Install the impact sensor.
  6. Connect the ground cable to the battery.
  7. Change the setting of the impact sensor using the SUBARU Select Monitor.
scientia non olet · About LEMON Manuals