LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Security System >> Inspection >> Check Battery Disconnect Protection

Check Battery Disconnect Protection

  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Open the front hood.
  4. Press the LOCK/ARM button of transmitter, and then wait until the security indicator light repeats 2 blinks per 1 second at interval of 1 second.
  5. Disconnect the ground cable from the battery.
  6. Reconnect the cable to the battery.
  7. Make sure that the security indicator light repeats 2 blinks per 1 second at interval of 1 second. If NG, replace the keyless entry control module.
scientia non olet · About LEMON Manuals