LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> Baja Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security And Locks >> Impact Sensor >> Operation >> Setting With/Without Impact Sensor Using SUBARU Select Monitor

Setting With/Without Impact Sensor Using SUBARU Select Monitor

  1. Connect the SUBARU Select Monitor to the data link connector.
  2. Turn the ignition switch ON.
  3. Select {KEYLESS UNIT} from the main menu.
  4. {Select {CUSTOMIZE UNIT}.
  5. Perform the setting with/without impact sensor.
    • Installation: ON
    • Removal: OFF
  6. Perform the impact sensor ON/OFF setting.
    • Installation: ON
    • Removal: OFF
  7. Turn the ignition switch OFF, and then remove the SUBARU Select Monitor.
scientia non olet · About LEMON Manuals