Center Differential Carrier: Disassembly

Remove the seal ring.

Fig 1: Identifying Seal Ring
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring, and pull out the shaft from center differential assembly.

Fig 2: Identifying Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Remove the thrust washers, pinion gears and washers from center differential assembly.

Fig 3: Identifying Pinion Gears
Courtesy of SUBARU OF AMERICA, INC.
Pull out the intermediate shaft and thrust bearing.
Extract the ball bearing with ST1 and ST2.
ST1 18654AA000 INSTALLER

ST2 18767AA000 REMOVER

Fig 4: Removing Ball Bearing

Courtesy of SUBARU OF AMERICA, INC.