LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Rear Gate Latch Assembly >> Removal

Rear Gate Latch Assembly: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Disconnect the harness connector of rear gate latch assembly.
  4. Remove the two screws.
    Fig 1: Locating Rear Gate Latch Assembly Screws
    G05033654
  5. Remove the rear gate latch assembly.
scientia non olet · About LEMON Manuals