Display Of Status Information

Check the operating condition of each sensor in the event of malfunction in seat belt buckle switch and seat position sensor, or when the seat belt buckle switch and seat position sensor has been replaced.

On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Airbag System} and press the [YES] key.
On the «Airbag System» display screen, select the {Status Data} and press the [YES] key. The following table is for support data.

SUPPORT DATA

Item

Display Contents

Seat position sensor LH

Front position ⁽¹⁾ /Rear position ⁽²⁾ /Other ⁽³⁾ /Initial Setting ⁽³⁾ /- ⁽⁵⁾

Seat position sensor RH

-⁽⁵⁾

Seat belt buckle switch LH

Buckled ⁽⁶⁾ /Unbuckled ⁽⁷⁾ /Other ⁽⁸⁾ /Initial Setting ⁽⁴⁾ /- ⁽⁹⁾

Seat belt buckle switch RH

Buckled ⁽⁶⁾/Unbuckled ⁽⁷⁾ /Other ⁽⁸⁾/lnitial Setting ⁽⁴⁾ /- ⁽⁹⁾

Passenger's airbag control status

ON ⁽¹⁰⁾/OFF ⁽⁵⁾ /Initial Setting ⁽⁴⁾

⁽¹⁾	The seat position is forward.

⁽²⁾	The seat position is rearward.

⁽³⁾	Displayed when data other than before and behind the seat, such as the breakdown etc, is input.

⁽⁴⁾	Displayed when it is initial.

⁽⁵⁾	Seat position sensor not supported

⁽⁶⁾	Seat belt fastened

⁽⁷⁾	Seat belt not fastened

⁽⁸⁾	Displayed when data other than belt fastened or not fastened, such as breakdowns is input.

⁽⁹⁾	Seat belt buckle switch not supported

⁽¹⁰⁾	Passenger's seat air bag operating state

⁽¹¹⁾	Passenger's seat air bag non-operating state

NOTE: For details concerning operation procedure, refer to the " EXTXREF SUBARU SELECT MONITOR OPERATION MANUAL".