LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Manifold Absolute Pressure Sensor >> Removal

Manifold Absolute Pressure Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector
    G05018450Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the manifold absolute pressure sensor from intake manifold.
scientia non olet · About LEMON Manuals