LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Pump >> Removal

Fuel Pump: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel on the floor.
NOTE: Fuel pump assembly consists of fuel pump and fuel level sensor.
  1. Release the fuel pressure. < Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL. >
  2. Drain fuel. < Refer to DRAINING FUEL , PROCEDURE, FUEL. >
  3. Remove the second seat. < Refer to REMOVAL , Second-row Seats. >
  4. Remove the service hole cover.
    Fig 1: Locating Service Hole Cover
    G05031103Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump.
    Fig 2: Locating Fuel Pump Connector
    G05016921Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the quick connector, and then disconnect the fuel delivery hose, return hose and jet pump hose. < Refer to REMOVAL , FUEL DELIVERY, RETURN AND EVAPORATION LINES. >
  7. Remove the nuts which install fuel pump assembly onto fuel tank.
    Fig 3: Identifying Delivery And Jet Pump Hose
    G05031105Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the fuel pump assembly from the fuel tank.
scientia non olet · About LEMON Manuals