LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Injector >> Removal >> RH Side

RH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. < Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL. >
  3. Disconnect the ground cable from battery.
  4. Open the fuel filler flap lid, and remove the fuel filler cap.
  5. Remove the air cleaner case. < Refer to REMOVAL , Air Cleaner Case. >
  6. Remove the fuel pipe protector RH.
    Fig 1: Locating Fuel Pipe Protector RH
    G05018455Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from fuel injector.
    Fig 2: Locating Fuel Injector Connector
    G05018456Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the engine harness from fuel injector pipe RH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 3: Locating Fuel Injector Pipe RH Bolts
    G05018411Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.
scientia non olet · About LEMON Manuals