LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Injector >> Removal >> LH Side

LH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. < Refer to RELEASING OF FUEL PRESSURE , PROCEDURE, FUEL. >
  3. Remove the battery.
  4. Open the fuel filler flap lid, and remove the fuel filler cap.
  5. Remove the generator harness from fuel pipe protector LH.
  6. Remove the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector LH
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from fuel injector.
    Fig 2: Locating Fuel Injector Connector
    G05018459Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the engine harness from fuel injector pipe LH.
  9. Remove the bolt which holds fuel injector pipe onto intake manifold.
    Fig 3: Locating Fuel Injector Pipe LH Bolts
    G05018418Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.
scientia non olet · About LEMON Manuals