LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Filler Pipe >> Removal

Fuel Filler Pipe: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel on the floor.
  1. Disconnect the ground cable from battery.
  2. Open the fuel filler flap lid, and remove the filler cap.
  3. Remove the screws which secure the gasket.
    Fig 1: Locating Fuel Filler Flap Lid Screws
    G04997449Courtesy of SUBARU OF AMERICA, INC.
  4. Lift-up the vehicle.
  5. Remove the rear wheel RH.
    Fig 2: Holding Rear Right Side Wheel
    G04997450Courtesy of SUBARU OF AMERICA, INC.
  6. Drain fuel from fuel tank. < Refer to DRAINING FUEL , PROCEDURE, FUEL. >
  7. Remove the mud guard. < Refer to REMOVAL , Mud Guard. >
  8. Remove the rear suspension assembly. < Refer to REMOVAL , Rear Sub Frame. >
  9. Disconnect the fuel filler hose.
    Fig 3: Identifying Fuel Filler Hose
    G05031097Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the bolts which hold fuel filler pipe bracket on the body.
    Fig 4: Locating Fuel Filler Pipe Bracket Bolts
    G05031098Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the fuel filler pipe to the underside of the vehicle.
scientia non olet · About LEMON Manuals