LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the generator harness from fuel pipe protector LH.
  4. Remove the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector LH
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from camshaft position sensor LH.
    Fig 2: Locating Camshaft Position Sensor LH Connector
    G05018443Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the camshaft position sensor LH.
    Fig 3: Locating Camshaft Position Sensor LH
    G05018444Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals