LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Differentials >> General Description >> Preparation Tool >> Special Tool

Special Tool

SPECIAL TOOL DESCRIPTION

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05032444
 398477701 HANDLE Used for installing the front and rear bearing cones.
G05032445
 398217700 ATTACHMENT SET Stand for rear differential carrier disassembly and assembly.
G05032446
 498447120 INSTALLER Used for installing the front oil seal.
G05032447
 498427200 FLANGE WRENCH Used for stopping rotation of companion flange when removing and tightening self-lock nut.
G05002914
 399780104 WEIGHT Used for installing the front bearing cone and the pilot bearing companion flange.
G05002441
 498247001 MAGNET BASE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used with DIAL GAUGE (498247100).
G05002442
 498247100 DIAL GAUGE
  • Used for measuring backlash between side gear and pinion, and hypoid gear.
  • Used with MAGNET BASE (498247001).
G05002948
 398177700 INSTALLER Used for installing the rear bearing cone.
G05032452
 398477703 DRIFT 2 Used for press-fitting bearing race (rear) of differential carrier.
G05002437
 398437700 DRIFT Used for installing the side oil seal.
G05032454
 398517700 REPLACER Used for removing rear bearing cone.
G04990233
 398487700 DRIFT Used for press-fitting side bearing cone.
G05002431
 398527700 PULLER ASSY Used for removing front oil seal.
G05032383
 28099PA090 OIL SEAL PROTECTOR
  • Used for installing the rear drive shaft to the rear differential.
  • For oil seal protection
G05032458
 399703600 PULLER ASSY Used for removing companion flange.
G05032459
 899874100 INSTALLER Used for installing the companion flange.
G05002433
 498077000 REMOVER Used for removing the differential side bearing cone.
G05002935
 899864100 REMOVER Used for removing the differential side bearing.
G05002923
 499277200 INSTALLER Used for installing the front bearing cone.
G05032463
 18758AA000 PULLER Used for removing side bearing cup.
G05032464
 18678AA000 DUMMY SHAFT Used for adjusting pinion height and preload.
G05032465
 18831AA010 DIFFERENTIAL CARRIER GAUGE Used for adjusting pinion height.
G05002925
 18630AA010 WRENCH ASSY Used for removing and installing the side oil seal holder.
G05032467
 498447100 INSTALLER Used for installing the oil seal.
G05032468
 399520105 SEATS
  • Used for removing the side bearing cone.
  • Used with PULLER SET (899524100).
scientia non olet · About LEMON Manuals