LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2006 >> B9 Tribeca Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Knock Sensor >> Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the intake manifold. < Refer to REMOVAL , INTAKE MANIFOLD. >
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
    Fig 1: Locating Knock Sensor
    G05018446Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals