LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
  3. Press [YES] key after displayed the information of body integrated unit type.
  4. On the << Integ. Unit mode failure diag >> display screen, select the {Clear Memory} and press the [YES] key.
    REFERENCE CHART

    Display Contents to be monitored
    Clear memory? Clear function of DTC and freeze frame data
  5. When the "Done" are shown on the display screen, turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About LEMON Manuals