LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback i, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> LAN System (Diagnostics) >> Read Current Data >> Operation

Read Current Data: Operation

  1. On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
  3. On the << Integ. Unit mode failure diag >> display screen, select the {Current Data Display & Save} and press the [YES] key.
  4. On the << Data Display Menu >> screen, select the {12 Data Display} and press the [YES] key.
  5. Using the scroll key, scroll the display screen up or down until the desired data is shown.

    < Ref. to , DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor.> < Ref. to , DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor.> < Ref. to , CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor.>

scientia non olet · About LEMON Manuals