LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback XT, Standard >> Repair and Diagnosis >> Transmission >> Clutch >> Clutch System >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

  1. Remove the straight pin and reservoir tank.
    Fig 1: Removing Straight Pin And Reservoir Tank
    G03832226Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
    Fig 2: Removing Oil Seal
    G03832227Courtesy of SUBARU OF AMERICA, INC.
  3. Pull the cylinder boot backward.
    Fig 3: Pulling Cylinder Boot Backward
    G03832228Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the snap ring.
    CAUTION: Be careful to prevent the rod, washer, piston and return spring from flying out when removing the snap ring.
  5. Remove the clutch damper.
scientia non olet · About LEMON Manuals