LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback XT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Automatic Transmission (5AT)) >> Automatic Transmission >> Extension Case and Intermediate Case >> Assembly

Extension Case and Intermediate Case: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Press-fit new oil seal using ST and press.

    ST 498057300 INSTALLER

  2. Press-fit the dust cover.
  3. Insert the multi-plate clutch, drive plate, driven plate and spring retainer.
    Fig 1: Inserting Multi-Plate Clutch, Drive Plate, Driven Plate And Spring Retainer
    G03831748Courtesy of SUBARU OF AMERICA, INC.
  4. Using the ST and compressor, install the snap ring.

    ST 18762AA000 COMPRESSOR SPECIAL TOOL

    Fig 2: Installing Snap Ring Using Compressor Special Tool ST 18762AA000
    G03831749Courtesy of SUBARU OF AMERICA, INC.
  5. Install the transfer clutch. < Ref. to , INSTALLATION , Transfer Clutch. >
    NOTE: For 3-transfer clutch model, make sure the press plate is included.
  6. Install the multi-plate hub assembly.
scientia non olet · About LEMON Manuals