LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback XT, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (A/T & M/T Control Systems) >> Select Lever >> Removal

Select Lever: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from battery.
  3. Move the select lever to "N" position.
  4. Lift-up the vehicle.
  5. Remove the rear exhaust pipe and muffler. NON-TURBO model

    < Ref. to REMOVAL , Rear Exhaust Pipe. >, < Ref. to REMOVAL , Muffler. >

    TURBO model

    < Ref. to REMOVAL , Rear Exhaust Pipe. >,< Ref. to REMOVAL , Muffler. >

  6. Remove the heat shield cover. (If equipped)
  7. Disconnect the cable from select lever, and then remove the cable bracket.
    Fig 1: Removing Cable Bracket
    G03750246Courtesy of SUBARU OF AMERICA, INC.
  8. Lower the vehicle.
  9. Remove the console box. < Ref. to REMOVAL , Console Box. >
  10. Disconnect the connectors, then remove the four bolts to take out the select lever assembly from body.
    Fig 2: Removing Bolts
    G03750247Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals