LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Manual Transmission And Differential) >> Front Differential Assembly >> Installation

Front Differential Assembly: Installation

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the differential side retainers using ST.

    ST 499787000 WRENCH ASSY

  2. Install the bearing outer race to transmission case.
  3. Install the differential assembly.
    NOTE:
    • Be careful not to fold the sealing lip of oil seal.
    • Wrap the right and left spline sections of axle shaft with vinyl tape to prevent scratches.
      Fig 1: Installing Differential Assembly
      G03751112Courtesy of SUBARU OF AMERICA, INC.
  4. Install the main shaft assembly.

    < Ref. to , INSTALLATION , Main Shaft Assembly. >

  5. Install the drive pinion assembly. < Ref. to , INSTALLATION , Drive Pinion Shaft Assembly. >
  6. Install the transmission case. < Ref. to , INSTALLATION , Transmission Case. >
  7. Install the transfer case with extension case assembly. < Ref. to , INSTALLATION , Transfer Case and Extension Case Assembly. >
  8. Install the manual transmission assembly to vehicle. < Ref. to , INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals