LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission >> Reduction Driven Gear >> Installation

Reduction Driven Gear: Installation

  1. Set the select lever to "P" range.
  2. Use a plastic hammer to install reduction driven gear assembly.
  3. Select the reduction gear shim. < Ref. to , ADJUSTMENT , Reduction Driven Gear. >
  4. Connect the transmission case, extension case and intermediate case, and install the rear wheel speed sensor. < Ref. to , INSTALLATION , Extension Case and Intermediate Case. >
  5. Install the transmission assembly into vehicle. < Ref. to , INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals