LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (5AT) >> Automatic Transmission >> Reduction Driven Gear >> Assembly

Reduction Driven Gear: Assembly

  1. Install the snap ring to reduction driven gear.
  2. Install the new ball bearing to reduction driven gear using press.
    Fig 1: Installing New Ball Bearing To Reduction Driven Gear
    G03831762Courtesy of SUBARU OF AMERICA, INC.
  3. Install the ball bearing on reverse side with the same procedure in step 2).
    Fig 2: Installing Ball Bearing On Reverse Side
    G03831763Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals