Read Current Data
- On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
- On the << System Selection Menu>> display screen, select the {Transmission} and press the [YES] key.
- Press the [YES] key after the information of transmission type is displayed.
- On the << Transmission Diagnosis>> display screen, select the {Current Data Display & Save} and press the [YES] key.
- On the << Transmission Diagnosis>> display screen, select the {Data Display} and press the [YES] key.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
- A list of the support data is shown in SUPPORT DATA LIST .
SUPPORT DATA LIST
| Item | Display | Unit of measure |
|---|---|---|
| Engine speed signal | Engine speed | rpm |
| Battery voltage | Battery Voltage | V |
| Accelerator Position Sensor | Acceleration opening angle | % |
| Front vehicle speed sensor signal | Front Wheel Speed | km/h |
| Gear position | Gear Position | - |
| Turbine speed sensor signal | Turbine Revolution Speed | rpm |
| Rear vehicle speed sensor signal | Rear Wheel Speed | km/h |
| Lateral G sensor | Lateral G sensor | V |
| ATF Temperature Sensor 1 Signal | ATF Temp. | °C |
| ATF Temperature Sensor 2 Signal | ATF Temp. 2 | °C |
| Turbine speed sensor 1 signal | Turbine Revolution Speed 1 | rpm |
| Turbine speed sensor 2 signal | Turbine Revolution Speed 2 | rpm |
| High & Low Reverse Clutch Solenoid Indicator Current | H&LR/C Solenoid Current | A |
| Direct Clutch Solenoid Indicator Current | D/C Solenoid Current | A |
| Front Brake Solenoid Indicator Current | F/B Solenoid Current | A |
| Input Clutch Solenoid Indicator Current | I/C Solenoid Current | A |
| Line Pressure Solenoid Indicator Current | P/L Solenoid Current | A |
| Lock-up Solenoid Indicator Current | L/U Solenoid Current | A |
| Transfer Solenoid Indicator Current | AWD Solenoid Current | A |
| High & Low Reverse Clutch Solenoid Target Oil Pressure | H&LR/C Solenoid Target Pressure | kPa |
| Direct Clutch Solenoid Target Oil Pressure | D/C Solenoid Target Pressure | kPa |
| Front Brake Solenoid Target Oil Pressure | F/B Solenoid Target Pressure | kPa |
| Input Clutch Solenoid Target Oil Pressure | I/C Solenoid Target Pressure | kPa |
| Line Pressure Solenoid Target Oil Pressure | P/L Solenoid Target Pressure | kPa |
| Lock-up Solenoid Target Oil Pressure | L/U Solenoid Target Pressure | kPa |
| Transfer Solenoid Target Oil Pressure | AWD Solenoid Target Pressure | kPa |
| Ignition switch | Ignition SW | ON Input or OFF Input |
| Tip signal | Tip Mode SW | ON or OFF |
| Cruise control On signal | Cruise Control Signal | ON or OFF |
| Tip Down Shift Signal | Down SW | ON or OFF |
| Stop light switch signal | Stop Light SW | ON or OFF |
| Tip Up Shift Signal | Up SW | ON or OFF |
| Drive range signal | D Range | ON or OFF |
| Reverse range signal | R Range | ON or OFF |
| Diagnosis Light Output Signal | Diagnosis Lamp | ON or OFF |
| Shift lock solenoid signal | Shift lock solenoid | ON or OFF |
| Parking range signal | P range | ON or OFF |
| P/N Range Output Signal | P/N Signal | ON or OFF |
| Neutral range signal | N range | ON or OFF |
| Inhibitor Switch 1 Input Signal | Inhibitor SW1 | High or Low |
| Inhibitor Switch 2 Input Signal | Inhibitor SW2 | High or Low |
| Inhibitor Switch 3 Input Signal | Inhibitor SW3 | High or Low |
| Inhibitor Switch 4 Input Signal | Inhibitor SW4 | High or Low |
| Inhibitor Switch 3 Monitor Input Signal | Inhibitor SW3 Monitor | High or Low |
| Backup light relay output signal | Back-up light relay | ON or OFF |
| High & Low Reverse Clutch Oil Pressure Switch Input Signal | H&LR/C Oil Pressure SW | ON or OFF |
| Direct Clutch Oil Pressure Switch Input Signal | D/C Oil Pressure SW | ON or OFF |
| Front Brake Oil Pressure Switch Input Signal | Fr/B Oil Pressure SW | ON or OFF |
| Input Clutch Oil Pressure Switch Input Signal | I/C Oil Pressure SW | ON or OFF |
| Low Coast Brake Oil Pressure Switch Input Signal | LC/B Oil Pressure SW | ON or OFF |
| Low Coast Brake Solenoid Input Signal | LC B Solenoid | ON or OFF |
NOTE:
For details concerning operation procedure, refer to the " SUBARU SELECT MONITOR OPERATION MANUAL ".