Rear Link: Installation
- Using a transmission jack, support the rear arm horizontally.
- Using new self-locking nuts, install the rear link.
NOTE:
- Tighten the self-locking nut with the bolt head secured when installing the adjusting bolt.
- Inspect the wheel alignment and adjust it if necessary.
Tightening torque:
- Rear link to Sub frame: 120 N.m (12.2 kgf-m, 89 ft-lb)
- Rear link to Rear arm: 120 N.m (12.2 kgf-m, 89 ft-lb)