LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Clutch System) >> Clutch Fluid >> Replacement

Clutch Fluid: Replacement

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • The FMVSS No. 116, fresh DOT3 or 4 brake fluid must be used.
  • When loosening bleeder screw, cover the bleeder with cloth to prevent brake fluid from being splashed over surrounding parts.
  • Avoid mixing different brands of brake fluid to prevent the quality of fluid from degrading.
  • Be careful not to allow dirt or dust to get into the reservoir tank.
NOTE:
  • During bleeding operation, keep the clutch reservoir tank filled with brake fluid to eliminate the entry of air.
  • Clutch pedal operation must be very slow.
  • For convenience and safety, it is advisable to have two people working.
  • The amount of brake fluid required is approx. 70 m Lambda (2.4 US fl oz, 2.5 Imp fl oz) for total clutch system.
  1. Remove the air intake chamber. < Ref. to REMOVAL , Air Intake Chamber. >
  2. Drain the brake fluid from reservoir tank.
  3. Refill the reservoir tank with recommended brake fluid.

    Recommended brake fluid: 

    FMVSS No. 116, fresh DOT3 or 4 brake fluid 

  4. Drain all contaminated fluid in the same method as air bleeding.
NOTE: Refill the brake fluid before reservoir tank becomes empty.
scientia non olet · About LEMON Manuals