LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Airbag System) >> Passenger's Airbag Module >> Removal

Passenger's Airbag Module: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to "CAUTION" in General Description before handling the airbag module. < Ref. to , CAUTION , GENERAL DESCRIPTION. >
  1. Turn ignition switch OFF.
  2. Disconnect the ground cable from the battery, and wait for at least 20 seconds before starting work.
  3. Open the glove box lid. Pull out two stopper pins and lower the glove box. < Ref. to REMOVAL , Glove Box. >
  4. Disconnect airbag connector (A), and then detach airbag connector from support beam bracket.
  5. Remove three bolts, and then carefully remove airbag module.
    Fig 1: Disconnecting Airbag Connector
    G03752160Courtesy of SUBARU OF AMERICA, INC.
  6. Refer to "CAUTION" for handling of a removed airbag module. < Ref. to ,  CAUTION  , GENERAL DESCRIPTION. > 
scientia non olet · About LEMON Manuals