LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Automatic Transmission) >> Dropping Resistor >> Inspection

Dropping Resistor: Inspection

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
DROPPING RESISTOR INSPECTION CHART

Step Check Yes No
1. CHECK RESISTOR. 
  1. Turn ignition switch to OFF.
  2. Disconnect the connector from dropping resistor.
  3. Measure the resistance between dropping resistor terminals.

Terminals 
No. 1 - No. 2: 		 Is the resistance 9 - 15 Ω? Go to step 2.  Replace the dropping resistor. < Ref. to , DROPPING RESISTOR . >
2. CHECK RESISTOR. 
Measure the resistance between dropping resistor terminals.
Terminals 
No. 3 - No. 4: 		 Is the resistance 9 - 15 Ω? Dropping resistor is normal. Replace the dropping resistor. < Ref. to , DROPPING RESISTOR . >
scientia non olet · About LEMON Manuals