LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Ignition (H4SO)) >> Spark Plug >> Installation >> RH Side

RH Side

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.

    Tightening torque (Spark plug): 

    21 N.m (2.1 kgf-m, 15 ft-lb) 

    CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

    Tightening torque (Air cleaner case): 

    33 N.m (3.4 kgf-m, 24.6 ft-lb)