Enable Condition
ENABLE CONDITION
| Secondary Parameters | Enable Conditions |
|---|---|
| All secondary parameters enable conditions | 1 second or more |
| Battery voltage | > 10.9 V |
| Atmospheric pressure | > 75.1 kPa (563 mmHg, 22.2 inHg) |
| Closed loop control with main feedback | operating |
| Impedance of front oxygen (A/F) sensor | 0 --> 50 |
| After engine starting | 120 seconds or more |
| Engine coolant temperature | >/= 75°C (167°F) |
| Engine speed | 1000 --> 2500 RPM |
| Vehicle speed | 10 --> 120 km/h (6.21 --> 74.6 MPH) |
| Amount of intake air | 10 --> 40 g/s |
| Engine load | < 0.02 g/rev |
| Learning value of EVAP cone, during purge | >/= 0.2 |
| Accumulated time of operating canister purge | 20 seconds or more |