SUBARU Select Monitor (OBD Mode)

On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu>> display screen, select the {Engine} and press the [YES] key.
Press the [YES] key after the information of engine type was displayed.
On the << Engine Diagnosis>> display screen, select the {OBD System} and press the [YES] key.
On the << OBD Menu>> display screen, select the {DTC Display} and press the [YES] key.
Make sure DTC is shown on the screen.

NOTE:

For detailed operation procedure, refer to the generic scan tool instruction cards, refer to the SUBARU SELECT MONITOR OPERATION MANUAL .
For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >