LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback R >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> Read Diagnostic Trouble Code (DTC) >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

  1. On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu>> display screen, select the {Engine} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the << Engine Diagnosis>> screen, select the {DTC Display}, and then press the [YES] key.
  5. On the << Diagnostic Code(s) Display>> screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)}, and then press the [YES] key.
NOTE:
  • For detailed operation procedure, refer to the generic scan tool instruction cards, refer to the SUBARU SELECT MONITOR OPERATION MANUAL .
  • For details concerning DTC, refer to the List of Diagnostic Trouble Code (DTC). < Ref. to , LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >
scientia non olet · About LEMON Manuals