Function Setting (ECM Customizing)

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
On the << Integ. Unit mode failure diag >> display screen, select the {ECM customizing} and press the [YES] key.

Change the setting with UP/DOWN key and press the [YES] key.

List of function setting item (ECM customizing)

ECM CUSTOMIZING REFERENCE CHART

No.	Data	Initial setting value	Customize setting	Remarks
1	Off delay time	Normal		Delay time below can be selected by setting.
				After door closed	After key unlock
			OFF	0 sec.	0 sec.
			Short	3 sec.	10 sec.
			Normal	5 sec.	20 sec.
			Long	8 sec.	30 sec.
2	Auto-lock time	30 sec.	0 - 60 seconds	Workable when Auto locking is set to "ON" and Automatic locking setup is "ON" Time can be changed by 10 seconds: 0 (OFF) - 60 (maximum).
3	Rr defogger op. mode	15 min.	15 min.	Rear defogger stops in 15 minutes automatically after switch is turned to ON.
3	Rr defogger op. mode	15 min.	Continuation	Rear defogger repeats active condition for 15 minutes and inactive condition for 2 minutes until switch is turned to OFF.
4	Wiper deicer op. mode	15 min.	15 min.	Wiper deicer stops in 15 minutes automatically after switch is turned to ON.
4	Wiper deicer op. mode	15 min.	Continuation	Wiper deicer repeats active condition for 15 minutes and inactive condition for 2 minutes until switch is turned to OFF.
5	Security Alarm Setup	OFF	ON	Security alarm (horn or siren) in active condition
5	Security Alarm Setup	OFF	OFF	Security alarm in inactive condition
6	Impact Sensor Setup	OFF	ON	Workable when Impact Sensor Setup is set to "ON" Impact sensor in active condition
6	Impact Sensor Setup	OFF	OFF	Impact sensor in inactive condition (Set Impact Sensor Setup of model without impact sensor to "OFF".)
7	Alarm monitor delay setting	ON		After doors are locked by keyless entry system operated, Alarm monitor starts in following time.
			ON	Delay time is 30 seconds.
			OFF	Delay time is 0 second.
8	Lockout prevention	ON	ON	Lockout prevention in active condition (Lockout prevention does not operate if safety knob is locked by hand.)
8	Lockout prevention	ON	OFF	Lockout prevention in inactive condition
9	Impact sensor (OP)	OFF	ON	Vehicle is controlled in impact sensor equipped mode. (Set Impact sensor to "OFF" in model without impact sensor. If Impact sensor is set to "ON", hazard, horn or siren operate after doors are locked by keyless entry system operated (Alarm monitor starting).
9	Impact sensor (OP)	OFF	OFF	Vehicle is controlled in impact sensor no-equipped mode.
10	Siren setting	OFF	ON	Siren sounds when alarm operates. (Set Siren setting to "OFF" in model without siren. Horn does not sound if Siren setting is set to "ON".)
10	Siren setting	OFF	OFF	Horn sounds when alarm operates.
11	Answer-back buzzer setup	ON	ON	Workable when Answer-back buzzer setup is set to "ON" When lock/unlock is selected by keyless entry system operated, answer-back buzzer sounds.
11	Answer-back buzzer setup	ON	OFF	When lock/unlock is selected by keyless entry system operated, answer-back buzzer does not sound.
12	Hazard answer-back setup	ON	ON	Workable when Hazard answer-back setup is set to "ON" When lock/unlock is selected by keyless entry system operated, hazard answer-back operates.
12	Hazard answer-back setup	ON	OFF	When lock/unlock is selected by keyless entry system operated, hazard answer-back does not operate.
13	Automatic locking setup	ON	ON	Workable when Automatic locking setup is set to "ON" When lock/unlock is selected by keyless entry system operated, automatic locking operates.
13	Automatic locking setup	ON	OFF	When lock/unlock is selected by keyless entry system operated, automatic locking does not operate.
14	Ans.-back Buzzer	ON	ON	Vehicle is controlled in answer-back buzzer equipped mode.
14	Ans.-back Buzzer	ON	OFF	Vehicle is controlled in answer-back buzzer non-equipped mode. (Set Ans.-back Buzzer to "OFF" in model without answer back buzzer.)
15	Auto locking	ON	ON	Vehicle is controlled in auto locking equipped mode.
15	Auto locking	ON	OFF	Vehicle is controlled in auto locking non-equipped mode. (Set Auto locking to "OFF" in model without answer-back buzzer.)
16	Initial Keyless Setting	-	-	-
16	Initial Keyless Setting	-	Execution	Settings of keyless entry system are initialized. (No. 2: 30 sec., No. 11: ON, No. 12: ON, No. 13: ON, No. 14: ON)
17	Initial button setting	-	-	-
17	Initial button setting	-	Execution	Settings of each function are initialized. (No. 1: Normal, No. 3: 15 min., No. 4: 15 min., No. 8: ON)
18	Initial Security setting	-	-	-
18	Initial Security setting	-	Execution	Settings of security system are initialized. (No. 5: OFF, No. 6: OFF, No. 7: ON, No. 10: OFF)
19	Passive Alarm (Not used)	OFF	ON	Workable when passive arming is set to "ON".
19	Passive Alarm (Not used)	OFF	OFF	Workable when passive arming is set to "ON".
20	Door open warning (prevention of battery run-out)	OFF	ON	If detecting door open for 30 minutes, room light, key illumination and door warning light are turned off to prevent battery run-out.
20	Door open warning (prevention of battery run-out)	OFF	OFF	Room light, key illumination and door warning light is not turned off.

After setting, make sure that vehicle equipment is same as the setting changed in the {Current Data Display & Save}.

CAUTION:

It is possible to control the original functions of vehicle when settings above are corresponded to vehicle equipment.
Do not change the settings except for setting above during operation of function setting.
Be sure not to change "Factory" initial setting except in installation of new body integrated unit.

NOTE: For details concerning operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".