Crankshaft Position Sensor: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which installs crankshaft position sensor to cylinder block.

Fig 2: Removing Crankshaft Position Sensor To Cylinder Block Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove crankshaft position sensor, and disconnect connector from it.

Fig 3: Disconnecting Crankshaft Position Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.