LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback Limited, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Automatic Transmission) >> Reduction Drive Gear >> Installation

Reduction Drive Gear: Installation

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the reduction drive gear assembly.
    NOTE: Insert it fully into position until the bearing shoulder bottoms.
    Fig 1: Installing Reduction Drive Gear Assembly
    G03750594Courtesy of SUBARU OF AMERICA, INC.
  2. Install the reduction driven gear. < Ref. to , INSTALLATION . >
  3. Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to , INSTALLATION . >
  4. Install the transmission assembly to the vehicle. < Ref. to , INSTALLATION . >
scientia non olet · About LEMON Manuals