LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Impreza Outback Sport, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Security System >> Inspection >> Check Security Indicator Light Circuit

Check Security Indicator Light Circuit

CHECK SECURITY INDICATOR LIGHT CIRCUIT

Step Check Yes No
1 CHECK SECURITY INDICATOR LIGHT. 
  1. Disconnect the security control unit harness connector.
  2. Ground the harness connector terminal with a suitable wire.

Connector & terminal 
(B93) No. 9 - Chassis ground: 		 Does the security indicator light illuminate? Replace the security control unit. Go to step 2  .
2 CHECK POWER SUPPLY FOR SECURITY INDICATOR LIGHT. 
  1. Disconnect the connector from the combination meter.
  2. Measure the voltage between the combination meter harness connector terminal and chassis ground.

Connector & terminal 
(i11) No. 3 (+) - Chassis ground (-): 		 Is the voltage more than 10 V? Go to step 3  . Check the harness for open circuits and shorts between the combination meter and the fuse.
3 CHECK SECURITY INDICATOR LIGHT CIRCUIT. 
Measure the resistance between the combination meter harness connector terminal and security control unit harness connector terminal.
Connector & terminal 
(i10) No. 6 - (B93) No. 9: 		 Is the resistance less than 10 ? Replace the combination meter printed circuit. Check the harness for open circuits and shorts between the combination meter and security control unit.
scientia non olet · About LEMON Manuals