Check Door Switch
CHECK DOOR SWITCH
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK DOOR SWITCH CIRCUIT. Measure the voltage between the security control unit harness connector terminal and chassis ground when any door or rear gate is opened. Connector & terminal Front and rear door: (B93) No. 5 (+) - Chassis ground (-): Trunk lid or rear gate: (B93) No. 4 (+) - Chassis ground (-): |
Is the voltage 0 V? | Go to step 2 . | Go to step 3 . |
| 2 CHECK DOOR SWITCH CIRCUIT. Measure the voltage between the security control unit harness connector terminal and chassis ground when all doors and rear gate are closed. Connector & terminal Front and rear door: (B93) No. 5 (+) - Chassis ground (-): Trunk lid or rear gate: (B93) No. 4 (+) - Chassis ground (-): |
Is the voltage more than 10 V? | The door switch is OK. | Go to step 3 . |
3 CHECK DOOR SWITCH.
Terminals Door switch No. 1 - No. 3: Rear gate latch switch (Wagon model) No. 1 - No. 2: Trunk room light switch (Sedan model) No. 1 - No. 2: |
Is the resistance more than 1 M when door switch is pushed? | Go to step 4 . | Replace the door switch. |
| 4 CHECK DOOR SWITCH. Measure the resistance between the door switch terminals. Terminals Door switch No. 1 - No. 3: Rear gate latch switch (Wagon model) No. 1 - No. 2: Trunk room light switch (Sedan model) No. 1 - No. 2: |
Is the resistance less than 1 when door switch is released? | Check the harness for open circuits and shorts between the security control unit and door switch. | Replace the door switch. |