Clear Memory Mode
- On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
- On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
- Press the [YES] key after the information of transmission type is displayed.
- On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
- When the "Done" is shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE:
- For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL .
- When {Clear Memory 2} is selected and executed, DTC and learned control memory is cleared. If Clear Memory 2 is performed, execute the learning control. < Ref. to FACILITATION OF LEARNING CONTROL , Operation, Subaru Select Monitor. >