LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Forester XT, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication (H4SO) >> Oil Pressure System >> Inspection

Oil Pressure System: Inspection

OIL PRESSURE SYSTEM INSPECTION PROCEDURE

Step Check Yes No
1 CHECK COMBINATION METER. 
  1. Turn the ignition switch to ON. (engine OFF)
  2. Check other warning lights.
 Do the warning lights go on? Go to step 2  . Repair or replace the combination meter. < Ref. to INSPECTION , Combination Meter System. >
2 CHECK HARNESS CONNECTOR BETWEEN COMBINATION METER AND OIL PRESSURE SWITCH. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the connector from oil pressure switch.
  3. Turn the ignition switch to ON.
  4. Measure the voltage of harness between the oil pressure switch connector and chassis ground.

Connector & terminal 
(E11) No. 1 (+) - Chassis ground (-): 		 Is the voltage more than 10 V? Replace the oil pressure switch. Go to step 3  .
3 CHECK COMBINATION METER. 
  1. Turn the ignition switch to OFF.
  2. Remove the combination meter.
  3. Measure the resistance of combination meter.

Terminal 
(i10) No. 9 - (i12) No. 3: 		 Is the resistance less than 10 Ω? Replace the harness connector between combination meter and oil pressure switch. Repair or replace the combination meter. < Ref. to INSPECTION , Combination Meter System. >
scientia non olet · About LEMON Manuals