LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Forester XS L.L. Bean Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> General Diagnostic Table >> Inspection >> Engine

General Diagnostic Table: Inspection: Engine

NOTE: Malfunction of parts other than those listed is also possible. < Ref. to ENGINE TROUBLE IN GENERAL . >
DIAGNOSTIC CHART

Symptom Problem parts
  1. Engine stalls during idling.
  1. Manifold absolute pressure sensor
  2. Intake air temperature sensor
  3. Air flow and ignition parts ((1))
  4. Engine coolant temperature sensor ((2))
  5. Crankshaft position sensor ((3))
  6. Camshaft position sensor ((3))
  7. Fuel injection parts ((4))
  1. 2. Rough idling
  1. Manifold absolute pressure sensor
  2. Intake air temperature sensor
  3. Engine coolant temperature sensor ((2))
  4. Air flow and ignition parts ((1))
  5. Air intake system ((5))
  6. Fuel injection parts ((4))
  7. Electronic throttle control
  8. Crankshaft position sensor ((3))
  9. Camshaft position sensor ((3))
  10. Oxygen sensor
  11. Fuel pump and fuel pump relay
  12. EGR valve
  1. 3. Engine does not return to idle.
  1. Engine coolant temperature sensor
  2. Throttle position sensor
  3. Manifold absolute pressure sensor
  4. Air flow and intake air temperature sensor
  5. EGR valve
  1. 4. Poor acceleration
  1. Manifold absolute pressure sensor
  2. Air flow and intake air temperature sensor
  3. Electronic throttle control
  4. Fuel injection parts ((4))
  5. Fuel pump and fuel pump relay
  6. Engine coolant temperature sensor ((2))
  7. Crankshaft position sensor ((3))
  8. Camshaft position sensor ((3))
  9. A/C switch and A/C cut relay
  10. Engine torque control signal circuit
  11. Ignition parts ((1))
  12. EGR valve
  13. Tumble generator valve
  1. 5. Engine stalls or engine sags or hesitates at acceleration.
  1. Manifold absolute pressure sensor
  2. Air flow and intake air temperature sensor
  3. Engine coolant temperature sensor ((2))
  4. Crankshaft position sensor ((3))
  5. Camshaft position sensor ((3))
  6. Purge control solenoid valve
  7. Fuel injection parts ((4))
  8. Electronic throttle control
  9. Fuel pump and fuel pump relay
  10. EGR valve
  11. Tumble generator valve
  1. 6. Surge
  1. Air flow and intake air temperature sensor
  2. Manifold absolute pressure sensor
  3. Engine coolant temperature sensor ((2))
  4. Crankshaft position sensor ((3))
  5. Camshaft position sensor ((3))
  6. Fuel pump and fuel pump relay
  7. EGR valve
  8. Tumble generator valve
  1. 7. Spark knock
  1. Air flow and intake air temperature sensor
  2. Manifold absolute pressure sensor
  3. Engine coolant temperature sensor
  4. Knock sensor
  5. Fuel injection parts ((4))
  6. Fuel pump and fuel pump relay
  7. EGR valve
  8. Tumble generator valve
  1. 8. After burning in exhaust system
  1. Air flow and intake air temperature sensor
  2. Manifold absolute pressure sensor
  3. Engine coolant temperature sensor ((2))
  4. Fuel injection parts ((4))
  5. Fuel pump and fuel pump relay
(1) Check ignition coil and ignitor assembly and spark plug.
(2) Indicate the symptom occurring only in cold temperatures.
(3) Ensure the secure installation.
(4) Check fuel injector, fuel pressure regulator and fuel filter.
(5) Inspect air leak in air intake system.
scientia non olet · About LEMON Manuals